With the new revision 3.0 of the most successful Computer-on-Module standard a new pinout Type is added to extend the reach of COM Express to server Type applications.

COM Express is a Computer-on-Module standard defined by the PICMG consortium (www.picmg. org). The first version was release in 2005 with updates in 2010 and 2012. The upcoming revision 3.0 defines 4 different sizes and 3 pinouts.

The new Type 7 is not a replacement for the well-established Type 6 pinout. It trades all audio and video interfaces for four 10G Ethernet ports and a total of 32 PCI Express lanes in order to support enhanced micro servers and other server Type applications that only allow for low power consumption but require high computing performance and communication throughput.

Check out our conga-X7 Evaluation carrier board for COM Express Type 7 modules.

Have a look at our COM Express Type 7 Basic modules here

COM Express Sizes

Mini 84 x 55 mm²
Basic 95 x 125 mm²
Compact 95 x 95 mm²
Extended 110 x 155 mm²

COM Express Pinouts

The PICMG specification defines different pinout Types in order to fulfill application specific demands. The pinout Types 1, 3, 4 and 5 are considered as legacy and are not used for new designs any longer. Products featuring older pinout Types are still available and refer to the revision 2.1 of the COM Express specification.

Type	Rows	PCIe	SATA	LAN 1G / 10G	USB 2.0 / 3.0	Display
10	AB	4	2	1 / -	8 / 2	LVDS/eDP, DDI
6	AB/CD	24	4	1 / -	8 / 4	VGA, LVDS, PEG, 3x DDI
7	AB/CD	32	2	1 / 4	4 / 4

Real Live Size / Pinout Combinations

	Mini 84x55mm²	Compact 95x125mm²	Basic 95x125mm@	Extended 110x155mm²
Type 10	++
Type 6		++	++
Type 7			++	possible

The Mini size was introduced with Rev. 2.1 and is only implemented for the single connector pinout Type 10. The most popular pinout today is Type 6 which replaced the legacy Type 2 computing modules.

The extended size definition of 110x155mm² did not reach market relevance in the past. With the new, server oriented pinout Type 7 which is defined in the COM Express specification rev. 3.0, this might come in to play as server Type applications require more DRAM capacity and also look for more extreme CPU performance levels. COM Express supports a maximum of 137 Watt power consumption. The larger size provides more real estate for more memory and allows for better heat transmission to support higher power consumption. When comparing the new Type 7 pinout to the Type 6 pinout it becomes visible that this will not be a replacement. It’s a definition that clearly targets headless server applications with low power consumption, high computing density and high I/O throughput.

When compared to Type 6 the new Type 7 definition removes all audio and video interfaces, the upper 4 USB 2.0, ExpressCard and the upper 2 SATA ports. This releases 60 pins on the AB connector and another 42 pins on the CD connector. These 102 newly released pins, in combination with some previously reserved pins, have been used to add extra PCI Express lanes and four 10 GB Ethernet KR lanes with a complete set of NC-SI sideband signals.