Note applicative

This Application Note gives a general overview of how to install, configure, use and troubleshoot the RTS Hypervisor on congatec x86-based modules.

This application note provides information on how to set up the Wake-on-LAN feature in Windows 10 or Linux for any congatec module that supports Wake-on-LAN feature.

This application note provides recommendations for COM Express® Computer-On-Module (COM) carrier board designs to comply with PCIe® 4.0 requirements.

This application note describes helpful UEFI Shell commands for system debugging and diagnosis. The UEFI Shell can be executed on all congatec x86 products with UEFI boot firmware.

This application note explains how to estimate, increase, and monitor eMMC lifetime.

This application note describes how to create a UEFI script file for automating the cBC firmware update and BIOS update in a production line environment. It also shows how UEFI script files can be…

This application note provides the reference design and design notes for SPI TPM used on SMARC carrier boards.

This application note provides basic information about the PCIe REFCLK, PCIe reference clock architectures, Spread-Spectrum-Clocking (SSC) feature and provides an example of a typical implementation…

This Application Note introduces the SFF-8639 (U.2) interface. The goal is to give an overview of the technology and hint on how to design-in this technology for customer carrier boards. 

This application note provides the pinout description, reference design and design notes for each of the three M.2™ sockets commonly implemented on embedded systems (Socket 1 – Key E, Socket 2 – Key…

This application note explains how to view the BIOS setup description of congatec products released after 2018 that feature an AMI Aptio® UEFI firmware by using the CgMlfViewer with a Menu Layout File…

This Application Note explains the fundamentals of the COM-Express Type 7 related 10GbE LAN LED behavior. In addition, we show our implementation for the 10GbE LAN LED related circuits with our…

This application note provides a list of recommended BIOS setup settings for real-time applications, describes each setting and informs about some additional topics related to real-time operating…

This Application Note explains the OEM specific customizations required to deploy a Secure Boot enabled BIOS. Although all latest congatec embedded BIOS releases offer Secure Boot support, it is still…

This application note explains how to configure a PCI Express (PCIe) link during runtime. This is especially helpful if a PCIe link is trained incorrectly during the Power On Self Test (POST). A PCIe…

This application note provides routing rules, reference schematic and design notes for USB 3.2 Gen 2 carrier board designs. 

This Application Note explains how the congatec Embedded BIOS and congatec Board Controller (cBC) support the very low power System Mode S5e (Enhanced Soft Off state). This power state is congatec…

This AN describes OEM Setup Modification

AN34 OEM SMBIOS/DMI tables

This AN describes how the Installation and Update of NXP MFGTool and congatec Bootloader Profiles works

This AN describes how to create a bootable USB stick with a UEFI shell

Questa nota applicativa fornisce particolari di implementazione per unità grafiche Intel EMGD su moduli Topcliff

Questa nota applicativa fornisce informazioni sull'installazione di Windows XP o Windows 7 quando il CDROM alimentato da USB non funziona

Questa nota applicativa fornisce informazioni e un esempio su come creare e aggiungere un modulo di tabella SLIC ACPI OEM nel BIOS di un modulo CPU XTX, COM Express o Qseven

This AN describes how to create and add a HDA verb table module to a congatec BIOS

Questa nota applicativa è un breve esempio di come installare e configurare un sistema che opera nel RAID livello 1 (mirror) con due unità disco fisso Serial ATA utilizzando Microsoft Windows XP

CGUTIL: Questa nota applicativa intende illustrare come creare o modificare file di configurazione del display con standard EPI (Embedded Panel Interface) utilizzando lo strumento di utilità di sistema congatec CGUTIL

CGUTIL: Questa nota applicativa descrive come creare e aggiungere un logo di avvio OEM al BIOS embedded congatec utilizzando lo strumento di utilità di sistema congatec CGUTIL

Questa nota applicativa è un breve esempio di come calcolare la durata massima di servizio della batteria quando si deve utilizzare un tipo specifico di batteria del circuito RTC. Descrive inoltre come determinare la capacità richiesta della batteria del circuito RTC quando è necessaria una durata specifica di servizio della batteria

CGUTIL: Questa nota applicativa descrive come creare e aggiungere mappe predefinite OEM CMOS utilizzando lo strumento di utilità di sistema congatec CGUTIL