conga-IC170/i7-6600U (P/N 052703)
Thin Mini-ITX board based on 6th Gen Intel® Core™ i7-6600U dual core processor 2.2 GHz, 4 MB cache, 2133 MT/s dual channel DDR4 SODIMM memory interface
Your item has been added to the inquiry
conga-IC170 (EOL)
Highest Performance Thin-Mini-ITX board based on 6th Generation Intel® Core™ Mobile SOC U-Processors
Selected module variant
Value adding ecosystem offerings
Memory
Cooling Solutions
Add-On Cards
conga-IC170 (EOL)
Highest Performance Thin-Mini-ITX board based on 6th Generation Intel® Core™ Mobile SOC U-Processors
- Highest Performance Thin Mini-ITX board
- 6th Generation Intel® Core™ Mobile SOC U-Processors
- Improved Graphics Performance with HD500 Series
- Wide Range Power Input 12-24 Volt
- congatec embedded Board Controller Features
- End of Life
Specification
Formfactor
Mini ITX
CPU
Intel® Core™ i7-6600U
(2 x 2.6 GHz, 4MB cache, 15W)
Intel® Core™ i5-6300U
(2 x 2.4 GHz, 3MB cache, 15W)
Intel® Core™ i3-6100U
(2 x 2.3 GHz, 3MB cache, 15W)
Intel® Celeron® 3955U
(2 x 2.0 GHz, 2MB cache, 15W)
DRAM
Support for 2x SO DIMM Socket (dual channel DDR4 up to 2133 MT/s), max. 2x 16GB
Ethernet
1x Intel I219-LM (GbE PHY), 1x Intel I211-AT (GbE controller)
I/O Interfaces
2 x DisplayPort
1 x Audio In
1 x Line Out
2 x LAN RJ45
1 x DC-In (external input) 12-24 V
Graphics
Intel® HD Graphics with OpenCL 2.0, OpenGL 4.3 and DirectX11.2 support | up to three independent displays: DVI, DisplayPort 1.2
Internal Connectors
3x SATA (6G, can be configured as RAID)
1x SATA Power
4x USB 2.0
1x LVDS (2x24 bit)
1x Embedded DisplayPort (x4)
1x Backlight (Power, control)
1x Monitor OFF
1x Surround
1x Front Panel HD Audio
1 x Digital MIC or S/PDIF
1x Internal stereo speaker
1x Feature connector - congatec custom (8 Bit General Purpose I/O)
1x Frontpanel (Power Switch, LEDs, Reset)
1x Intrusion (Case Open),
1x opt. battery header signal + power (SBM3)
1x FAN CPU
1x FAN System
1x CEC
2x Serial Port COM2 (opt. as ccTALK)
1x miniPCI Express
1x M2 (Supported card sizes: 3042 and 2242)
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board information, Board Statistics, BIOS Setup, Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control
Security
Trusted Platform Module (TPM 2.0)
Power Management
Power Management | ACPI S3/S4 DeepSx | Wake on time from S5 | Power Supply 12-24 V | 2x fan (CPU / system) monitored & controlled
Temperature
Operating: 0 to +60°C Storage: -20 to +70°C
Humidity
Operating: 10 - 90% r. H. non cond.
Size
170 x 170 mm (6.7” x 6.7”)
Documents
All documents found on this page are updated without notification. Always check this page for
the latest
version.
Data Sheet
26.03.2021
Software
[ EFI ]
[ Linux ]
[ Windows 10 ]
[ Windows 10 IoT ]
[ Windows 7 ]
[ Windows 8 ]
[ Windows 8 Embedded ]
[ Windows Embedded Standard 7 ]
congatec System Utility Rev. 1.7.0.1. for EFI shell. Use for BIOS update or customization and panel configuration.
Driver for modules with on-module UART, realized using the congatec board controller. V1.1
CGOS API programmers manual
CGOS legacy driver 1.03.022 for 32bit Linux (Kernel version 2.6.x, 3.x and 4.x)
CGOS legacy driver 1.03.032 for 64bit Linux (Kernel version 3.x, 4.x, 5.x and 6.x).
For kernel versions >= 5.8 please refer to readme.txt and/or consider using the cgoslx-x64-1.03.032_vmalloc.tar.xz package.
CGOS legacy driver 1.03.032 for 64bit Linux (Kernel versions 5.8 or higher). Modified driver package with Kernel patch as a workaround for memory allocation issues with Kernels >= 5.8
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
CGOS direct driver for Linux.
congatec System Utility Rev. 1.6.2
Use for BIOS update or customization and panel configuration. Linux source version.
Important note: Only compatible with cgos 1.03.032 and older!
Use for BIOS update or customization and panel configuration. Linux source version.
Important note: Only compatible with cgos 1.03.032 and older!
congatec System Utility Users Guide
congatec System Utility Rev. 1.7.0.1. for Linux. Use for BIOS update or customization and panel configuration.
Qt based GUI version of the congatec System Utility for Windows and Linux; Rev. 1.0.0.
Supports BIOS and Firmware update as well as BIOS customization and panel configuration.
Provides easy access to all CGOS functions and includes a CGOS based hardware monitor with logging functionality.
Important note: Only compatible with cgos 1.03.032 and older!
Important note: Only compatible with cgos 1.03.032 and older!
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
The congatec Menu Layout File Viewer (CgMlfViewer) and the congatec Menu Layout File Editor (CgMlfEditor) are Qt based applications
meant to read Menu Layout Files (*.mlf) created by a congatec BIOS, to display all setup nodes and options and for the CgMlfEditor also to edit them.
The congatec Menu Layout File Viewer (CgMlfViewer) is a Qt based application
meant to read Menu Layout Files (*.mlf) created by a congatec BIOS and to display all setup nodes and options.
CGOS legacy driver 1.03.021 for 64bit Windows 10/11 only.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
CGOS direct driver for Windows 10 and Windows 11.
Please refer to readme.txt for supported functions and boards.
congatec System Utility Users Guide
congatec System Utility Rev. 1.7.0.1. for Windows. Use for BIOS update or customization and panel configuration.
Qt based GUI version of the congatec System Utility for Windows and Linux; Rev. 1.0.0.
Supports BIOS and Firmware update as well as BIOS customization and panel configuration.
Provides easy access to all CGOS functions and includes a CGOS based hardware monitor with logging functionality.
Important note: Only compatible with cgos 1.03.032 and older!
Important note: Only compatible with cgos 1.03.032 and older!
Intel Chipset Software Installation Utility for installing the Windows INF files. Rev. 10.1.1.38
Intel HD Graphics Driver for Windows 10 64 Bit on TS175
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) Management Engine Firmware for Windows 10 - 64 Bit
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel Network Connections Software and Driver for Windows 64Bit. Rev. 22.2
Intel IO Drivers for Kabylake platform.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
congatec System Utility Rev. 1.7.0.1. for Windows. Use for BIOS update or customization and panel configuration.
Board Support Package for congatec CPU modules - Rev. 1.7. Contains 64bit Windows 10 IoT Enterprise LTSB driver files for video, SATA, sound, network.
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
CGOS legacy driver 1.03.021 for 32bit and 64bit Windows.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Intel Chipset Software Installation Utility for installing the Windows* INF files. Rev. 10.10.1.9
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) USB 3.0 eXtensible Host Controller driver Rev. 4.0.3.49.
Intel(R) Management Engine Firmware for Windows 64 Bit for conga-TSSL.
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel Network Connections Software and Driver for Windows 64Bit. Rev. 22.2
Intel HD Graphics Driver for Windows 7 and Windows 8 64Bit Rev. win64 15.40.10.64.4300
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Intel Chipset Software Installation Utility for installing the Windows* INF files. Rev. 10.10.1.9
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) Management Engine Firmware for Windows 64 Bit for conga-TSSL.
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel Network Connections Software and Driver for Windows 64Bit. Rev. 22.2
Intel IO Drivers for Skylake platform.
Intel HD Graphics Driver for Windows 7 and Windows 8 64Bit Rev. win64 15.40.10.64.4300
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Board Support Package for congatec CPU modules Rev. 1.7.1. Contains 64 Bit Windows Embedded Standard 8 driver files for video, SATA, sound, network and CGOS API.
Board Support Package for congatec CPU modules Rev. 1.7.1. Contains 32 Bit Windows Embedded Standard 8 driver files for video, SATA, sound, network and CGOS API.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Board Support Package for congatec CPU modules Rev. 1.7. Contains 64bit Windows Embedded Standard 7 driver files for video, SATA, sound, network.
Board Support Package for congatec CPU modules Rev. 1.7. Contains 32 Bit Windows Embedded Standard 7 driver files for video, SATA, sound, network and CGOS API.
Product Variants
conga-IC170/i5-6300U (P/N 052700)
Thin Mini-ITX board based on 6th Gen Intel® Core™ i5-6300U dual core processor 2.4 GHz, 3 MB cache, 2133 MT/s dual channel DDR4 SODIMM memory interface
conga-IC170/i3-6100U (P/N 052701)
Thin Mini-ITX board based on 6th Gen Intel® Core™ i3-6100U dual core processor 2.3 GHz, 3 MB cache, 2133 MT/s dual channel DDR4 SODIMM memory interface
conga-IC170/3955U (P/N 052702)
Thin Mini-ITX board based on 6th Gen Intel® Celeron® 3955U dual core processor 2 GHz, 2 MB cache, 2133 MT/s dual channel DDR4 SODIMM memory interface
conga-IC170 IO Shield Thin Size (P/N 052752)
IO Shield for Mini-ITX conga-IC170 *for Thin Mini-ITX chassis - height 25mm
conga-IC170 IO Shield Standard Size (P/N 052751)
IO Shield for Mini-ITX conga-IC170 *for standard Mini-ITX chassis - height 40mm
Ecosystem Details
Memory
DDR4-SODIMM-2400 (4GB) (P/N 068790)
DDR4 SODIMM memory module with 2400 MT/s and 4GB RAM
DDR4-SODIMM-2400 (8GB) (P/N 068791)
DDR4 SODIMM memory module with 2400 MT/s and 8GB RAM
DDR4-SODIMM-2400 (16GB) (P/N 068792)
DDR4 SODIMM memory module with 2400 MT/s and 16GB RAM
Cooling Solutions
conga-ICx/CSA (P/N 052252)
Active cooling solution for conga-IC97, conga-IC170 and conga-IC175 with 12V fan and Thin Mini-ITX height, to be used with conga-ICx/Retention Frame PN 052254.
conga-IC87/Retention Frame (P/N 052254)
Retention frame for standard cooling for conga-IC87, conga-IC97, conga-IC170 and conga-IC175.
Add-On Cards
conga-MITX/eDP to DP Adapter (P/N 052231)
eDP to standard DisplayPort evaluation adapter for congatec Mini-ITX and SMARC 2.0.
https://www.congatec.com/it/prodotti/login/formdownload/
