conga-IC97/i7-5650U (P/N 052501)
Thin Mini ITX Baseboard with Intel® Core™ i7-5650U dual core processor with 2.2GHz, 4MB L2 cache and 1600MT/s dual channel DDR3L memory interface.
Your item has been added to the inquiry
conga-IC97 (EOL)
Highest Performance Thin-Mini-ITX board based on 5th Generation Intel® Core™ Mobile SOC U-Processors
Selected module variant
Value adding ecosystem offerings
Cooling Solutions
Memory
Add-On Cards
conga-IC97 (EOL)
Highest Performance Thin-Mini-ITX board based on 5th Generation Intel® Core™ Mobile SOC U-Processors
- Carte Thin-Mini-ITX à très hautes performances
- Processeurs SOC U Intel® CoreTM mobiles de la 5e génération
- Amélioration des performances graphiques jusqu’à GT3 HD6000
- Large plage d’alimentation électrique allant de 12 à 24 volts
- congatec embedded Board Controller Features
Specification
Formfactor
Mini ITX
CPU
Intel® Core™ i7-5650U
(2 x 2.2 GHz, 4MB cache, 15W)
Intel® Core™ i5-5350U
(2 x 1.8 GHz, 3MB cache, 15W)
Intel® Core™ i3-5010U
(2 x 2.1 GHz, 3MB cache, 15W)
Intel® Celeron® 3765U
(2 x 1.9 GHz, 2MB cache, 15W)
DRAM
Support for 2x SO DIMM Socket (dual channel DDR3L up to 1600 MT/s) max. 16GB
Ethernet
Dual LAN Gbit / 100 Mbit / 10 Mbit; 1x Intel Gigabit Ethernet PHY i218LM (with AMT support); 1x Intel Gigabit Ethernet Controller i210/i211
I/O Interfaces
1 x DC-In (external input) 12-24 V
2 x DisplayPort
1 x Line Out
1 x Audio In
2 x LAN RJ45
4 x
1 x PCIe x4 (via extension card)
Graphics
Intel® HD Graphics
with OpenCL 1.2, OpenGL 4.0 and DirectX11.1 support; up to three independent displays: DDI, DVI, DP, VGA
with OpenCL 1.2, OpenGL 4.0 and DirectX11.1 support; up to three independent displays: DDI, DVI, DP, VGA
Internal Connectors
PCIe x4 Slot (Gen.2)
1x Full/Half-size Mini PCIe Slot shared with PCIe x1 slot
1x Full/Half-size Mini PCIe Slot (shared with mSATA)
3x SATA (6G)
1x mSATA (SATA-III; 600)
1x SATA Power
4x USB 2.0
1x LVDS (2x24 bit)
1x Embedded DisplayPort (x4)
1x Backlight (Power, control)
1x Monitor OFF
1x Surround
1x Front Panel HD Audio
1x Serial Port COM1 (opt. as ccTALK)
1 x Digital MIC or S/PDIF
1x Internal stereo speaker
1x Serial Port COM2
1x Intrusion (Case Open),
1x Feature connector - congatec custom (8 Bit General Purpose I/O)
1x Frontpanel (Power Switch, LEDs, Reset)
FAN CPU
1x internal power header (12-19V)
1x opt. battery header signal + power (SBM3)
1x opt. CEC
optional with SIM Card Slot
congatec Board Controller
Multi Stage Watchdog, non-volatile User Data Storage, Manufacturing and Board information, Board Statistics, BIOS Setup, Data Backup, I²C bus (fast mode, 400 kHz, multi-master), Power Loss Control
Security
The conga-IC97 can be optionally equipped with a discrete ”Trusted Platform Module” (TPM 1.2 / 2.0).
Temperature
Standard
Operating: 0 to +60°C Storage: -20 to +80°C
Operating: 0 to +60°C Storage: -20 to +80°C
Humidity
Operating: 10 to 90% r. H. non cond. / Storage 5 to 95% r. H. non cond.
Size
170 x 170 mm (6.7” x 6.7”)
Documents
All documents found on this page are updated without notification. Always check this page for
the latest
version.
Data Sheet
26.03.2021
Software
[ EFI ]
[ Linux ]
[ Windows 10 ]
[ Windows 10 IoT ]
[ Windows 7 ]
[ Windows 8 ]
[ Windows 8 Embedded ]
[ Windows Embedded Standard 7 ]
congatec System Utility Rev. 1.7.0.1. for EFI shell. Use for BIOS update or customization and panel configuration.
Driver for modules with on-module UART, realized using the congatec board controller. V1.1
CGOS API programmers manual
CGOS legacy driver 1.03.022 for 32bit Linux (Kernel version 2.6.x, 3.x and 4.x)
CGOS legacy driver 1.03.032 for 64bit Linux (Kernel version 3.x, 4.x, 5.x and 6.x).
For kernel versions >= 5.8 please refer to readme.txt and/or consider using the cgoslx-x64-1.03.032_vmalloc.tar.xz package.
CGOS legacy driver 1.03.032 for 64bit Linux (Kernel versions 5.8 or higher). Modified driver package with Kernel patch as a workaround for memory allocation issues with Kernels >= 5.8
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
CGOS direct driver for Linux.
congatec System Utility Rev. 1.6.2
Use for BIOS update or customization and panel configuration. Linux source version.
Important note: Only compatible with cgos 1.03.032 and older!
Use for BIOS update or customization and panel configuration. Linux source version.
Important note: Only compatible with cgos 1.03.032 and older!
congatec System Utility Users Guide
congatec System Utility Rev. 1.7.0.1. for Linux. Use for BIOS update or customization and panel configuration.
Qt based GUI version of the congatec System Utility for Windows and Linux; Rev. 1.0.0.
Supports BIOS and Firmware update as well as BIOS customization and panel configuration.
Provides easy access to all CGOS functions and includes a CGOS based hardware monitor with logging functionality.
Important note: Only compatible with cgos 1.03.032 and older!
Important note: Only compatible with cgos 1.03.032 and older!
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
The congatec Menu Layout File Viewer (CgMlfViewer) and the congatec Menu Layout File Editor (CgMlfEditor) are Qt based applications
meant to read Menu Layout Files (*.mlf) created by a congatec BIOS, to display all setup nodes and options and for the CgMlfEditor also to edit them.
The congatec Menu Layout File Viewer (CgMlfViewer) is a Qt based application
meant to read Menu Layout Files (*.mlf) created by a congatec BIOS and to display all setup nodes and options.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
CGOS direct driver for Windows 10 and Windows 11.
Please refer to readme.txt for supported functions and boards.
congatec System Utility Users Guide
congatec System Utility Rev. 1.7.0.1. for Windows. Use for BIOS update or customization and panel configuration.
Qt based GUI version of the congatec System Utility for Windows and Linux; Rev. 1.0.0.
Supports BIOS and Firmware update as well as BIOS customization and panel configuration.
Provides easy access to all CGOS functions and includes a CGOS based hardware monitor with logging functionality.
Important note: Only compatible with cgos 1.03.032 and older!
Important note: Only compatible with cgos 1.03.032 and older!
Intel Chipset Software Installation Utility for installing the Windows* INF files. Rev. 10.0.25.
CP210x USB to UART Bridge Driver v6.6.1 (32/64bit) - for TS87
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) Management Engine Firmware for Windows 32/64 Bit for conga-xx97 ME10.0_5M_10.0.39.1003
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel HD Graphics Driver for Windows 7 and Windows 8 64Bit Rev. win64 15.40.2.64.4240.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
congatec System Utility Rev. 1.7.0.1. for Windows. Use for BIOS update or customization and panel configuration.
Board Support Package for congatec CPU modules - Rev. 1.7. Contains 64bit Windows 10 IoT Enterprise LTSB driver files for video, SATA, sound, network.
Intel Network Connections Software and Driver for Windows 32/64Bit
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
CGOS legacy driver 1.03.021 for 32bit and 64bit Windows.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Intel Chipset Software Installation Utility for installing the Windows* INF files. Rev. 10.0.25.
CP210x USB to UART Bridge Driver v6.6.1 (32/64bit) - for TS87
EAPI (Embedded Application Programming Interface) wrapper DLLs for 32bit and 64bit Windows.
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) USB 3.0 eXtensible Host Controller driver Rev. 3.0.3.60
Intel(R) Management Engine Firmware for Windows x64 - Kernel-Mode Driver Framework version 1.11 update for Windows 7, and Windows Server 2008 R2
Intel(R) Management Engine Firmware for Windows x86 - Kernel-Mode Driver Framework version 1.11 update for Windows 7, and Windows Server 2008 R2
Intel(R) Management Engine Firmware for Windows 32/64 Bit for conga-xx97 ME10.0_5M_10.0.39.1003
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel HD Graphics Driver for Windows 7 and Windows 8 32Bit Rev. win32 15.36.12.4243.
Intel HD Graphics Driver for Windows 7 and Windows 8 64Bit Rev. win64 15.36.22.64.4243.
Intel Network Connections Software and Driver for Windows 32/64Bit
Driver for on-module UART realized using the congatec board controller.
Please make sure to use this driver together with congatec Board Controller firmware revision CGBCP426 or higher.
CGOS API programmers manual
CGOS API Library for the .NET Framework
The CgosClr.dll is an assembly that allows easy access to the CGOS API from CLR (Common Language Runtime) .NET Framework languages like C#, Visual Basic, J#, and managed C++.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Intel Chipset Software Installation Utility for installing the Windows* INF files. Rev. 10.0.25.
CP210x USB to UART Bridge Driver v6.6.1 (32/64bit) - for TS87
EAPI (Embedded Application Programming Interface) wrapper DLLs for 32bit and 64bit Windows.
High Definition Audio Codec driver for Realtek chips. For Windows 7, 8, 8.1 and 10 64Bit. Rev. 2.79.
Intel(R) Management Engine Firmware for Windows 32/64 Bit for conga-xx97 ME10.0_5M_10.0.39.1003
High Definition Audio Codec driver for Realtek chips. Supports Windows 7 32Bit, Windows 8.1 32Bit and Windows 10 32Bit
Intel HD Graphics Driver for Windows 7 and Windows 8 32Bit Rev. win32 15.36.12.4243.
Intel HD Graphics Driver for Windows 7 and Windows 8 64Bit Rev. win64 15.36.22.64.4243.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Board Support Package for congatec CPU modules Rev. 1.7.1. Contains 64 Bit Windows Embedded Standard 8 driver files for video, SATA, sound, network and CGOS API.
Board Support Package for congatec CPU modules Rev. 1.7.1. Contains 32 Bit Windows Embedded Standard 8 driver files for video, SATA, sound, network and CGOS API.
CgosPy is a Python package containing the cgos module which provides ctypes wrapper functions for accessing the CGOS API.
Board Support Package Update for congatec CPU modules. Update for WES7 SP1. Requires cgwes7.zip
Board Support Package for congatec CPU modules Rev. 1.7. Contains 64bit Windows Embedded Standard 7 driver files for video, SATA, sound, network.
Board Support Package for congatec CPU modules Rev. 1.7. Contains 32 Bit Windows Embedded Standard 7 driver files for video, SATA, sound, network and CGOS API.
Product Variants
conga-IC97/3765U (P/N 052504)
Thin Mini-ITX board based on Intel® Celeron® 3765U dual core processor with 1.90GHz, 2MB L2 cache and 1600MT/s dual channel DDR3L SODIMM memory interface.
conga-IC97/i3-5010U (P/N 052503)
Thin Mini ITX Baseboard with Intel® Core™ i3-5010U dual core processor with 2.1GHz, 3MB L2 cache and 1600MT/s dual channel DDR3L memory interface.
conga-IC97/i5-5350U (P/N 052502)
Thin Mini ITX Baseboard with Intel® Core™ i5-5350U dual core processor with 1.8GHz, 3MB L2 cache and 1600MT/s dual channel DDR3L memory interface.
Ecosystem Details
Cooling Solutions
conga-ICx/CSA (P/N 052252)
Active cooling solution for conga-IC97, conga-IC170 and conga-IC175 with 12V fan and Thin Mini-ITX height, to be used with conga-ICx/Retention Frame PN 052254.
conga-IC87/Retention Frame (P/N 052254)
Retention frame for standard cooling for conga-IC87, conga-IC97, conga-IC170 and conga-IC175.
Memory
DDR3L-SODIMM-1600 (2GB) (P/N 068755)
DDR3L SODIMM memory module with 1600MT/s (PC3L-12800S) and 2GB RAM.
DDR3L-SODIMM-1600 (8GB) (P/N 068757)
DDR3L SODIMM memory module with 1600 MT/s (PC3L-12800S) and 8GB RAM.
DDR3L-SODIMM-1600 (4GB) (P/N 068756)
DDR3L SODIMM memory module with 1600 MT/s (PC3L-12800S) and 4GB RAM.
Add-On Cards
conga-MITX/eDP to DP Adapter (P/N 052231)
eDP to standard DisplayPort evaluation adapter for congatec Mini-ITX and SMARC 2.0.
https://www.congatec.com/fr/produits/login/formdownload/
