Zur Anfrage hinzugefügt

conga-SMC1/SMARC-ARM

Ausgewählte Modulvariante

Compact sized Carrier Board for ARM based SMARC 2.0 modules

Formfactor	3.5" Carrier Board
Board Variant	PN 020750 conga-SMC1/SMARC-ARM for ARM based SMARC 2.0 Modules
Internal Connectors and Features	1x LVDS 18/24 bit single/dual channel LVDS 2x optional eDP/DSI (dependent on processor platform) 1x LCD backlight (5V and 12V) 1x SATA Gen3 (support of SATADOM VCC PIN 7 and PIN 8) 1x SATA Power (+5V, +12V) 1x mPCIe full/half size (support for PCIe Gen3 and USB 2.0) 1x M.2 Type E 2230 (I2S, PCIe Gen3, USB 2.0) 1x M.2 Type B 2242/2280 (2x PCIe Gen 3, USB 2.0) 2x MIPI-CSI 1x Micro SIM (muxed between M.2 Type B and mini PCIe) 2x RS 232/422/485 (COM 0 and COM 2 with handshake) 2x RS232 (COM 1 and COM3 TX/RX only) 2x CAN 1x Micro SD card 1x GPIO connector (up to 8 GPIO) 1x Feature connector (Batlow, Charging, GbESDP, WD) 1x Buttons and LEDs (Power, Reset, Sleep, LID, Power LED, SATA LED) 1x Onboard power button 1x Onboard power state LED 1x SPI/eSPI header 1x I2C header 1x DMIC and analog front panel audio output 1x 12V FAN connector (4-pin) 1x RTC backup(CR2032) 1x Internal DC-IN
External Connectors	2x GbERJ45 2x USB 2.0 1x USB 2.0 OTG 2x USB 3.0/3.1 1x HDMI 1x DP++ 1x Audio Jack 4-pin with I2S audio WM8904 1x External DC-In (12-24V)
Power Specification	External and internal DC-In (12-24V Wide Range Carrier Board Supply )
Operating Temperature	Operating Temp.: 0°C … +60°C Storage Temp.: -20°C … +70°C
Humidity	Operating Hum.:10% -90% r. H. non cond. Storage Hum.: 5% -95% r. H. non cond.
Size	146 x 102 mm (approx. 5.75" x 4.02")

Alle Dokumente auf dieser Seite werden ohne Benachrichtigung aktualisiert. Prüfen Sie diese Seite immer auf die neueste Version.

Data Sheet

13.11.2020

Manual

30.10.2024

conga-SMC1/SMARC-ARM (P/N 020750)

Compact sized SMARC 2.0 Carrier Board for ARM based SMARC Modules