conga-SEVAL

To achieve a quick start with SMARC congatec offers an evaluation carrier board, which routes all the SMARC signals to standard interface connectors.
 

I/O

• 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
• 1x SATA
• 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
• 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
• 2x CAN
• GPIO
• 1x SDIO interface
• 2x I²C Bus
• 1x eSPI/SPI1 on header
• 1x SPI Bus
• 1x FAN control
• 1x Disk Drive Power Output
   

Ethernet

2x Gigabit Ethernet
 

Internal Graphic Interface

2x24 bit LVDS connector shared with 2x eDP or 2xDSI

External Graphic Interfaces

• 1x DP++
• 1x HDMI

Camera Interface

2x CSI2
 

Audio

I2S Audio interface and HDA interface


Buttons and LED’s 
Power button | Reset button | Sleep button | LID button | various indication LEDs

Feature Connector
1x Standard congatec Feature Connector

Postcode
4x 7-Segment Postcode LEDs connected to GP_I2C bus

Temperature
Operating: -40 .. +85°C | Storage: -20 .. +80°C

Power Input
ATX Power Supply | 12V - 24V Wide Range Carrier Board Supply | 3.0V - 5.25V Wide Range Module Supply | USB Type C PD (12V - 20V)

Humidity 
Operating: 10 - 90% r. H. non cond. | Storage: 5 - 95% r. H. non cond.

Size
294 x 172 mm

Carrierboards

conga-SEVAL (P/N 007010)

Evaluation Carrier Board for SMARC 2.0 modules.